440 Mechanical Fuel Pump Installation
(10 Photos, 1 Comment : Last updated 2012-12-02)
These photos show how to install a mechanical fuel pump on the Chrysler 440 engine used in a FMC.
Rub Rail Insert
(10 Photos, 1 Comment : Last updated 2016-07-30)
Pictures of some of the rub rail inserts I have tried. The one that almost fits is 7/8" size. One inch fits but sticks out way too much to match the "end caps". I put name address etc of 7/8" manufacturer in a regular Mechanics Corner entry "Rub Rail Insert".
Tuft Airflow
(8 Photos, 0 Comments : Last updated 2021-10-07)
Which way is the INVISIBLE air going ? Knitting yarn TUFTS are a cheap and effective way to "see" airflow near the surface.
Bellcrank (idler and steering) bushing removal
(5 Photos, 1 Comment : Last updated 2016-10-22)
These photos show removal of the bushings and some of the tools I made to push them out after cutting off one flare end.
Low Exhaust Manifolds for 440 Gas Engine FMC
(9 Photos, 1 Comment : Last updated 2016-11-10)
Pictures showing the 75-78 Dodge/Ply VAN and Class C MH big block engine exhaust manifold as used on the driver side ONLY and how a pair of those manifold can be used on the FMC to replace the "stock" HIGH exhaust manifolds that burn up plug wires and valve covers and other nearby items.
| Wheel Cylinders and Fittings (Brakes)
(7 Photos, 1 Comment : Last updated 2016-12-08)
Pictures showing the thin copper washer required AT the wheel cylinder where the flex brake hose attaches, the bleeder screw and what the hole in the wheel cylinders look like at the bottom.
FMC 440 Motor Mount
(1 Photo, 0 Comments : Last updated 2017-05-04)
FMC 440 Motor Mount #2436121 or 2863735
FMC Brake at the Wheel
(2 Photos, 0 Comments : Last updated 2017-09-27)
All four FMC Brakes are the same at the wheel. They all 4 look just like this picture.
Studs/Nuts FMC 440 Exhaust Manifold
(12 Photos, 1 Comment : Last updated 2017-09-29)
Info and sources about removing, installing, sealing, corrosion on the cylinder head exhaust manifold studs and nuts on the FMC 440 engine.
| FMC Brake Drum NEW Manufac by DuraBrake #13174
(18 Photos, 17 Comments : Last updated 2017-11-11)
Pictures and dimension on a NEW Manufactured FMC Brake Drum made by DuraBrake
Recessed TP Holder for Bathroom
(3 Photos, 0 Comments : Last updated 2018-08-31)
FMC Drum Brake Spring Kit H9224/UP2455
(1 Photo, 1 Comment : Last updated 2018-10-13)
This is Drum Brake Spring Kit (good for 2 wheels) that has "dried up" and can't be found anywhere (at least by me).
Chey Truck wheel MOD for FMC use.
(2 Photos, 0 Comments : Last updated 2019-11-30)
This drawing by IZZY (FMC #263) is for machining a 10 bolt Chevy MEDIUM truck aluminum rim to fit a stock FMC using stock FMC type lug nuts. This has been done SUCCESSFULLY without any problems.
|
