Better pic of the 2nd snap-ring.
NOTE: THESE TWO SNAP-RINGS ARE WHAT HOLDS YOUR DRIVE AXLE'S IN PLACE. BEFORE REASSEMBLY: BE CERTAIN THE GROOVE THEY SIT IN IS PERFECTLY CLEAN BEFORE YOU PUT THEM BACK IN (WIPE OUT THEN BLOW WITH COMPRESSED AIR) - AND THEN BE CERTAIN THEY ARE FULLY SEATED TIGHT AGAINST EACH OTHER AND FULLY INTO THE GROOVE ALL AROUND. I USED A LONG FLAT SCREWDRIVER WITH A SOFT-BLOW HAMMER TO TAP-TAP ALL AROUND TO CONFIRM THEY ARE TIGHT AGAINST EACH OTHER. YOU MAY ALSO HEAR THE RING "SNAP" INTO PLACE WHEN YOU HAVE IT.
|
