My trusty framing square was the only handy straight-edge so I used it to point the shortest pathway from the corner of the roof-vent opening across to the cavity above the wardrobe closet. I had a chunk of 3-wire kicking around so I used that and simply deleted the red wire. Note: I've already removed the entire house A/C system; including, both A/C units (lower late-model style), the control panel above the wardrobe, and all wiring EXCEPT - the two 120-volt AC feed wires that were/are still feeding from the engine house transfer switch and upper breaker box in the rear bedroom. There they are labeled AC #1 & AC #2. My roof air unit will live on AC#1 circuit while the AC#2 circuit will drop down (out of the junction box in the wardrobe) directly into the new storage compartment, that used to house the AC units, to feed an easily accessible GFI recepticle for running power tools, BBQ rotisserie's etc.
|
