Here you can see the interior of the windings housing. You can see the four remnants of the plastic attachment tabs which I simply cut with a sharp blade to detach the plastic housing from the cover lid. Note the spring on the float rod. I took that off and gently stretched it slightly to increase contact pressure on the windings. Move the float rod through its range of motion. I decided I'd bolt the plastic housing back together with the metal cover plate with small #6 SS nuts/bolts/wshers. I did it with 2 of them. If you try to fix yours, you need to move the float rod to establish exactly where you can safely drill and insert bolts through the assembly without affecting float-rod travel.
|
