| ||
|
You are logged in as a guest. ( logon | register ) |
FMC #324 | ||
Author: dkarnath (Show all albums) I will be posting some pictures of 324 during my time working on it. |
| |||||
1st attempt at vacuuming/cleaning the duct work that had mice nest stuff in it... | Not a lot of room to get to the duct work... | On the outbound end of the furnace duct work, you can lift up the floor in the bathroom cabinet and have a look... | Ewe...This is what I found, old factory spray foam, mice poop and insulation nesting material.. | ||
The duct work runs along the floor under backside of the fridge, then behind/under the toilet.. | The duct work here and the sheet metal for the front kitchen vent are missing. I need to fix this | (1 Comments) I removed the tail lights in order to spray foam the voids in the body. The cavity that runs up along side the rear window can allow exhaust fumes to enter the coach from the cabinets..I have a real 440 exhaust fume problem I'm trying to address while cruising down the road, no it's not from beans this time... | The cavity you need to try a block off is this area where the AC drains come down off the roof. I believe that's the only spot? I honestly don't know for sure... | ||
Here's a snap shot of the bracket that holds the tail lights tight against the inner body. | (1 Comments) I was able to unscrew one side of this bracket, and the tail light assembly slid down and out. The Philips head screws can be a bit of a pain to get to. I used a shorty Philips. | The furnace didn't want to slide out the exterior of the coach due to the duct work mounting points on the side of the furnace. Came right out the inside thought. | The duct work under the bathroom sink was needing some repair | ||
|
Running MegaBBS ASP Forum Software © 2002-2024 PD9 Software | (Delete all cookies set by this site) | |