| Search | Statistics | User Listing | Member Roster | Coach DB | Forums | Albums |
| Home -> FMC Owner's Forum -> Albums -> View Album |
|
| You are logged in as a guest. ( logon | register ) |
The mounting support for the tail lights is a piece of plywood fiberglass resin into place. The passenger side was pulled away from the body allowing the assembly to easily push in and start to fall. I think this was caused by the painters removing the fmc emblems? When they drilled out the original rivots they may have pushed the mount off the fiberglass. idk | It had a case of saggy light housing... | The license plate light was fried... | These lenses were on upside down also. But if you notice, the light housings are upside down also, see the bulb comes down from the top... |
Figured out why the back up tail lights weren't working... | (1 Comments) Here is 324 parked next to my ol' # 850. We were at the 2019 Oakridge OR rally. | Here's that #6 plug after 450 miles. The 440 used 1/4 of a quart of oil, I still have one leaky valve cover, and I just replaced the fuel pump gasket that was leaking oil badly....So not too bad on oil usage really. | |
The tires were 17 years old. | When I first opened the hot water/furnace exterior door, I noticed the prop rod was laying in the bottom, makes it hard to lock the door with that rod hanging out, so I made a little hook/hanger for the rod to snap into to keep it up out of the way when closing the door. | The hot water heater has 110v and gas heat. The 110v seemed to work, but the water stinks like burnt electrical or maybe an algae?? I removed the element to inspect, all is good including the wiring. I tried the gas and it is working also. I added bleach to the water system and hot water heater to try and kill any bacteria it may have. We'll see how that goes.... | |
 | Running MegaBBS ASP Forum Software © 2002-2024 PD9 Software | (Delete all cookies set by this site) |