| ||
|
You are logged in as a guest. ( logon | register ) |
FMC #324 | ||
Author: dkarnath (Show all albums) I will be posting some pictures of 324 during my time working on it. |
| |||||
plenty of room to roll around underneath.... | Time to look at the stub axles. I found the passenger side has some slop between the yoke and axle. Hopefully it just needs serviced and re-tightened up. | (1 Comments) | With the newly painted bumper, I washed her up and took a 100 mile trip up to the mountains to visit family. This was the first time sleeping in it since Fall 2019. I've only driven it on a couple short drives just to exercise it. | ||
I am brightening up the rear of the coach, painting the rear bumper stainless steel. My paper machine ran out of paper....So I found the stash of Christmas wrapping paper to finish the job.... | First peek without the rear ladder.... | I found my second low style manifold, should be here next week.... | |||
Here's my finished set up. I moved the throttle return spring aft mount so the spring would be more of a straight pull against the throttle pin, before it was at an angle. | These pieces really aren't fun to play with. Having engine access in the bedroom makes it a lot easier, but it's still like working on a v8 down in the back of a boat! | (2 Comments) clear tubing to this old air nozzle and lightly push the oil inside the cable. | (1 Comments) While I had the cable apart, I thought I would lube it. I used Tri-Flow spray. I adapted some clear tubing to the cable end | ||
|
Running MegaBBS ASP Forum Software © 2002-2024 PD9 Software | (Delete all cookies set by this site) | |