|
|
Elite Veteran
Location: Medford, OR | I've been searching for some new studs, I matched up mine with Euclid part # E-8992R, but I've yet to purchase, been shopping it and/or just trying to locate some, I've seen them priced anywhere from 3.99 each with a 10 count minimum + shipping which puts them around 6.50 ea. and I've also seen them for 15.00 dollars a piece!...These are for the stock 17" steel wheels. I only need a handful. If anyone wants to confirm my part number for future reference, feel free. I will post pictures and etc after I do the job.
From what I've read, E-8993R would be the correct stud for the Alcoa, they are a bit longer. |
|
|
|
Elite Veteran
Location: Medford, OR | Ok, so I confirmed the factory steel 17" stud part # myself, it is
http://www.fmcowners.com/mbbs22/photos/show-album.asp?albumid=112&p...
I can't confirm a part # for the Alcoa application because I don't have Alcoa's....so ignore what I wrote on the previous entry. |
|
|
|
Elite Veteran
Location: Medford, OR | Here is an example of the front and rear studs that are on #850. I haven't done any homework (measurements) on the rear stud, but maybe (possibly) the rear stud could be E-8993R. You'd have to do your own homework to confirm that.
http://www.fmcowners.com/mbbs22/photos/show-album.asp?albumid=112&p...
|
|
|