Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Discussion -> View Thread

You are logged in as a guest. ( logon | register )

wheels
View previous thread :: View next thread
   General Discussion -> DiscussionMessage format
 
Homie
Posted 2011-06-13 7:10 PM (#1447)
Subject: wheels


Location: Surprise AZ.
(208.53.93.19)		I have a set of 19.5 Alcoas 10 lug
1.-is there an adapter available for my FMC
2.-do I have to change my drums
3.-can I just use five lugs on the 10 lug wheels
please advice
Thank You
Top of the page Bottom of the page
hemi354az
Posted 2011-06-14 1:14 PM (#1448 - in reply to #1447)
Subject: Re: wheels


Location: Scottsdale, Aridzona
(24.251.221.92)		There are several different (bolt center, pilot hole, lug type, rim width, offset) 19.5 Alcoas.
You have not given enough information to "guess" at what 19.5 Alcoa rim you have.
What lug BOLT CENTER dimension are your 19.5 wheels ?
What size is the big center hole in your 19.5 wheels ?
Do your 19.5 wheels have ball seat lug holes ?
What size hole are the lug holes ?
Do you have 6 or 4 ?
Top of the page Bottom of the page
Homie
Posted 2011-06-14 1:56 PM (#1449 - in reply to #1447)
Subject: Re: wheels


Location: Surprise AZ.
(208.53.93.19)		The (4) Alcoas I have, do not have ball seats on the lug holes
actually all I wanted to know is can i use 5 of the 10 lug holes supplied
the FMC has an 8 inch bolt circle with a 6 inch Center hole.
The (4) Alcoas have a 7-1/4 inch bolt circle with a 4.85 inch Center hole.
I have designed an Adapter for either 5 on or 10 lug on.
if You need to see the Adapter i would be happy to show it to You Via. email
email me at tiziz63@yahoo.com
Thanks
Homie

Top of the page Bottom of the page
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2026 PD9 Software		(Delete all cookies set by this site)