Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum -> Albums -> View Album

You are logged in as a guest. ( logon | register )

FMC #324
Author: dkarnath (Show all albums)

I will be posting some pictures of 324 during my time working on it.
Show Newest Photos First | Show Oldest Photos First112 Photos - Page : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10]


Their was no bushing inside the eye of the cable end, so I was on a mission to make one out of something.


Digging through the misc parts bin found some ideas...


(2 Comments)
This is an adapter for a bike inner tube, fits pretty good.


I drilled out the inside diameter of the gold piece with a 3/16" drill bit, and then some hacksaw/file work made this. I will look for something better next time I'm at the hardware store.


(1 Comments)
While I had the cable apart, I thought I would lube it. I used Tri-Flow spray. I adapted some clear tubing to the cable end


(2 Comments)
clear tubing to this old air nozzle and lightly push the oil inside the cable.


These pieces really aren't fun to play with. Having engine access in the bedroom makes it a lot easier, but it's still like working on a v8 down in the back of a boat!


Here's my finished set up. I moved the throttle return spring aft mount so the spring would be more of a straight pull against the throttle pin, before it was at an angle.


I found my second low style manifold, should be here next week....


First peek without the rear ladder....




I am brightening up the rear of the coach, painting the rear bumper stainless steel. My paper machine ran out of paper....So I found the stash of Christmas wrapping paper to finish the job....
Show Newest Photos First | Show Oldest Photos First112 Photos - Page : [1] [2] [3] [4] [5] [6] [7] [8] [9] [10]

Return to viewing all photo albums



Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2021 PD9 Software
(Delete all cookies set by this site)