|You are logged in as a guest. ( logon | register )|
|Author: dkarnath (Show all albums)|
I will be posting some pictures of 324 during my time working on it.
I drilled out the inside diameter of the gold piece with a 3/16" drill bit, and then some hacksaw/file work made this. I will look for something better next time I'm at the hardware store.
This is an adapter for a bike inner tube, fits pretty good.
Digging through the misc parts bin found some ideas...
Their was no bushing inside the eye of the cable end, so I was on a mission to make one out of something.
Broke return spring and the carburetor throttle cable end
Bad picture, but I can't stand the location of the oil pressure and water temp gauges, my field of vision is terrible on them no matter where I adjust the steering wheel and seat. I would like to move them up above on the dash, or add warning lights? idk. For now, I clocked the water temp gauge to straight up for easy reading...
I was camping by myself this trip. I was tinkering on interior electrical, mainly getting the hall step lights working and the vent fan above the oven, both were switch/corrosion related.
I kept getting small water drips coming from various plumbing fittings, then I noticed this gauge way in the back underneath the sink reading around 90psi!!! I was using the domestic water pump on this trip, I didn't hear it cycle on it's own building the pressure up past 60psi, so the pressure build is either the hot water heater warming up? Or? My next venture will be to have city water hooked up and see if the pressure slowly builds...
Little fish in a big pond???
|Running MegaBBS ASP Forum Software|
© 2002-2022 PD9 Software
|(Delete all cookies set by this site)|