|You are logged in as a guest. ( logon | register )|
|Author: dkarnath (Show all albums)|
I will be posting some pictures of 324 during my time working on it.
plenty of room to roll around underneath....
Time to look at the stub axles. I found the passenger side has some slop between the yoke and axle. Hopefully it just needs serviced and re-tightened up.
With the newly painted bumper, I washed her up and took a 100 mile trip up to the mountains to visit family. This was the first time sleeping in it since Fall 2019. I've only driven it on a couple short drives just to exercise it.
I am brightening up the rear of the coach, painting the rear bumper stainless steel. My paper machine ran out of paper....So I found the stash of Christmas wrapping paper to finish the job....
First peek without the rear ladder....
I found my second low style manifold, should be here next week....
Here's my finished set up. I moved the throttle return spring aft mount so the spring would be more of a straight pull against the throttle pin, before it was at an angle.
These pieces really aren't fun to play with. Having engine access in the bedroom makes it a lot easier, but it's still like working on a v8 down in the back of a boat!
clear tubing to this old air nozzle and lightly push the oil inside the cable.
While I had the cable apart, I thought I would lube it. I used Tri-Flow spray. I adapted some clear tubing to the cable end
|Running MegaBBS ASP Forum Software|
© 2002-2022 PD9 Software
|(Delete all cookies set by this site)|