Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Mechanic's Corner -> View Thread

You are logged in as a guest. ( logon | register )

Engine Belts
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General Discussion -> Mechanic's CornerMessage format
Posted 2022-10-10 2:05 PM (#8113)
Subject: Engine Belts


Location: Anchorage, Alaska
I have a list of belts I'm putting on my 440 gas engine 1975 FMC . If you have any thing different
please let me know. Fan: Gates XL7375, alternator and AC Clutch: XL 7695, power steering pump: XL 7470.
If you know how to adjust and tighten the power steering belt please leave a post. I am going to try to loosen the pump to see if that is the adjustment procedure. To install the power steering belt on my vehicle I had to remove
The fan and fan pullys.
Top of the page Bottom of the page
Posted 2022-10-10 10:34 PM (#8114 - in reply to #8113)
Subject: RE: Engine Belts


I used 7375, 7695 for A/C and Alt and 7425 for power steering. The power steering pump bracket has a spot for a 1/2 breaker bar just above the filler cap. Just barely loosen bolts and then lift up on breaker bar and then snug up bolts. I used a 9/16 deep well socket. I too had to remove fan and pulley.

Edited by FMC599 2022-10-10 10:38 PM
Top of the page Bottom of the page
Posted 2022-10-13 9:14 PM (#8115 - in reply to #8114)
Subject: Re: Engine Belts

Extreme Veteran

Location: Scottsdale, Aridzona
Please see Message #2308 in
Choices . . . crank or water pump . . . one pulley or the other . . . Lou #120
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to HomeRunning MegaBBS ASP Forum Software
© 2002-2024 PD9 Software
(Delete all cookies set by this site)