| ||
|
You are logged in as a guest. ( logon | register ) |
Windshield wipers Jump to page : 1 Now viewing page 1 [25 messages per page] | View previous thread :: View next thread |
General Discussion -> Mechanic's Corner | Message format |
BigRabbitMan |
| ||
Expert Location: Cottage Grove, OR | I don't see it having been discussed here, but I have had some conversations with individuals about the challenges of finding windshield wipers that fit the FMC. Well, today was the day that I needed to purchase some for my coach. First I went to an Auto Zone store I was passing by and they looked at the coach and its metal framed blades and said that they didn't have anything like that as all the new ones are plastic. He then told me to check with the local (Ripley, WV) Napa store as they do some truck business and may have something. I went there and showed them what I needed. He then went into the back room and came out with a set of blades just like the ones that have been on the coach for the last 16 years. All metal except the blade itself. They fit the wiper arms perfectly. My existing wipers were 20" and these were 18" but will be fine. So if you need wiper blades, go to Napa and ask for part #60-1870 for the 18" ones or part number 60-2070 for the 20" ones. The set cost me $21.18 and well worth it to have the correct ones for the coach. Still rollin', rollin', rollin', and rollin', | ||
LCAC_Man |
| ||
Elite Veteran Location: Oceanside, CA | Timely post...I just tested my new wiper switches and saw that my blades are ragged out... neither of those numbers come up on the NAPA website...I'll have to stop in and check. | ||
BigRabbitMan |
| ||
Expert Location: Cottage Grove, OR | LCAC_Man - 2016-07-07 7:36 PM Timely post...I just tested my new wiper switches and saw that my blades are ragged out... neither of those numbers come up on the NAPA website...I'll have to stop in and check. Len, I double checked and I had an incorrect digit in the number. I have corrected it in the original post. See if the corrected numbers come up or not. | ||
LCAC_Man |
| ||
Elite Veteran Location: Oceanside, CA | Yep that works, here's the links: https://www.napaonline.com/napa/en/p/ACO602070/ACO602070 https://www.napaonline.com/napa/en/p/ACO601870/ACO601870 | ||
LCAC_Man |
| ||
Elite Veteran Location: Oceanside, CA | Adding on to this, the AC Delco p/n 8-7187 is a direct fit for the 18" wiper refill. I was digging through a box of parts that came with my coach and found a new pair of them, great timing as I've been working on windshield wash the past couple days.. Edited by LCAC_Man 2016-11-29 7:36 AM | ||
Darren |
| ||
Contributor Location: Washougal, WA | Update: new part numbers and links 18” https://www.napaonline.com/en/p/TRI601870 20” https://www.napaonline.com/en/p/TRI602070 | ||
dkarnath |
| ||
Elite Veteran Location: Medford, OR | Im pulling up this older thread, I searched but didn't see any threads containing a good part number for a windshield washer/pump tank replacement. I figured it could go with wiper blade discussion. I commented on Duramaxer's album, but we don't get notifications on album comments. He put a new tank on 477. Do you have that part number Duramaxer? | ||
LCAC_Man |
| ||
Elite Veteran Location: Oceanside, CA | this is the smaller version of what I used: https://www.usplastic.com/catalog/item.aspx?itemid=117549 | ||
Jump to page : 1 Now viewing page 1 [25 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
Running MegaBBS ASP Forum Software © 2002-2024 PD9 Software | (Delete all cookies set by this site) | |