Search | Statistics | User Listing | Member Roster | Coach DB Forums | Albums
FMC Owner's Forum
Home -> FMC Owner's Forum ->  General Discussion -> Mechanic's Corner -> View Thread

You are logged in as a guest. ( logon | register )

Bell Crank Bushings
Jump to page : 1
Now viewing page 1 [25 messages per page]
View previous thread :: View next thread
   General Discussion -> Mechanic's CornerMessage format
 
dkarnath
Posted 2018-08-13 11:22 AM (#5757)
Subject: Bell Crank Bushings


Elite Veteran

5001002525
Location: Medford, OR
Hey Lou,

Is this a special/specific size bushing driver in your pic? Or just a random piece of steel? I'm about to do this job and was curious if I will be able to pop the new bushings in/out without the use of any special tool.

Thanks

http://www.fmcowners.com/mbbs22/photos/show-album.asp?albumid=148&p...


Top of the page Bottom of the page
hemi354az
Posted 2018-08-13 1:15 PM (#5758 - in reply to #5757)
Subject: Re: Bell Crank Bushings


Extreme Veteran

50025
Location: Scottsdale, Aridzona
Hey Dan,
I've got a 14 X 30 Taiwan lathe and a Bridgeport Mill . . . so turned some steel bar stock . . . filed to fit . . . and paint to match.
Hard to get a good "step" shoulder on a round "driver" without a lathe.
I'll provide dimensions . . . if you have a friend or a shop that can whittle them for you from a good piece of steel . . . no regurgitated rebar.
Drive OUT ! Lou #120
Top of the page Bottom of the page
hemi354az
Posted 2018-08-13 1:32 PM (#5759 - in reply to #5758)
Subject: Re: Bell Crank Bushings


Extreme Veteran

50025
Location: Scottsdale, Aridzona
. . . and please see - http://www.fmcowners.com/mbbs22/forums/thread-view.asp?tid=781&post...
and my Message #4034 about using the "tools" in the pictures in the link above. Lou #120
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

Go to FMCowners.com HomeRunning MegaBBS ASP Forum Software
© 2002-2024 PD9 Software
(Delete all cookies set by this site)