|
|
Regular
| Wondering if anyone has an updated schematic from the work the RVS used to do. In looking into the vehicle history, RVS did a complete rewire of the machine.
Thanks
Carl |
|
|
|
Expert
Location: Cottage Grove, OR | They were not very good at documenting the things that they did. But they did tend to redo things the same way the factory did them. Most deviations from stock are done by owners. |
|
|
|
Elite Veteran
Location: Victoria, BC. Canada | I guess you might have missed this Carl:
http://www.fmcowners.com/mbbs22/forums/thread-view.asp?tid=1232&pos...
John is a goldmine of info on this stuff.
He's also very approachable.
Cheers,
Terry
#846 |
|
|
|
Regular
| HOLY CATS, John is going to be a goldmine. I had not seen this. I tend to just stay in the mechanics corner. |
|
|
|
Expert
Location: Cottage Grove, OR | Subscribe to the mechanics, general discussion and rally forums so that you will not miss important discussions. |
|
|
|
Regular
| Just FYI, I spent the rainy weekend digging through the massive amount of paperwork I have on the FMC. I still do not have a diagram for the relay switches, but I do have an updated wiring diagram from RVS which shows some changes to the wiring that they implemented. That helps as my Gas Guage,Speedo, Blower fan and center console guages are not working at the moment. |
|
|