wheels

Homie Posted 2011-06-13 7:10 PM (#1447) Subject: wheels Location: Surprise AZ. (208.53.93.19) I have a set of 19.5 Alcoas 10 lug 1.-is there an adapter available for my FMC 2.-do I have to change my drums 3.-can I just use five lugs on the 10 lug wheels please advice Thank You hemi354az Posted 2011-06-14 1:14 PM (#1448 - in reply to #1447) Subject: Re: wheels Location: Scottsdale, Aridzona (24.251.221.92) There are several different (bolt center, pilot hole, lug type, rim width, offset) 19.5 Alcoas. You have not given enough information to "guess" at what 19.5 Alcoa rim you have. What lug BOLT CENTER dimension are your 19.5 wheels ? What size is the big center hole in your 19.5 wheels ? Do your 19.5 wheels have ball seat lug holes ? What size hole are the lug holes ? Do you have 6 or 4 ? Homie Posted 2011-06-14 1:56 PM (#1449 - in reply to #1447) Subject: Re: wheels Location: Surprise AZ. (208.53.93.19) The (4) Alcoas I have, do not have ball seats on the lug holes actually all I wanted to know is can i use 5 of the 10 lug holes supplied the FMC has an 8 inch bolt circle with a 6 inch Center hole. The (4) Alcoas have a 7-1/4 inch bolt circle with a 4.85 inch Center hole. I have designed an Adapter for either 5 on or 10 lug on. if You need to see the Adapter i would be happy to show it to You Via. email email me at tiziz63@yahoo.com Thanks Homie