|
|
Contributor
Location: Anchorage, Alaska | I have a list of belts I'm putting on my 440 gas engine 1975 FMC . If you have any thing different
please let me know. Fan: Gates XL7375, alternator and AC Clutch: XL 7695, power steering pump: XL 7470.
If you know how to adjust and tighten the power steering belt please leave a post. I am going to try to loosen the pump to see if that is the adjustment procedure. To install the power steering belt on my vehicle I had to remove
The fan and fan pullys. |
|
| |
|
Contributor
| I used 7375, 7695 for A/C and Alt and 7425 for power steering. The power steering pump bracket has a spot for a 1/2 breaker bar just above the filler cap. Just barely loosen bolts and then lift up on breaker bar and then snug up bolts. I used a 9/16 deep well socket. I too had to remove fan and pulley.
Edited by FMC599 2022-10-10 10:38 PM
|
|
| |
|
Extreme Veteran
Location: Scottsdale, Aridzona | Please see Message #2308 in http://www.fmcowners.com/mbbs22/forums/thread-view.asp?tid=549&post...
Choices . . . crank or water pump . . . one pulley or the other . . . Lou #120 |
|
| |
Engine Belts