10-hole 19.5" Alcoas?

andy1canada Posted 2021-09-30 9:16 AM (#7883) Subject: 10-hole 19.5" Alcoas? Elite Veteran Location: Victoria, BC. Canada Can't say I've seen these before. Check out the last pic in the series here: https://seattle.craigslist.org/skc/cto/d/seattle-1973-fmc-motorhome-... Anyone who knows what they are (part #) please share it. I emailed the seller to try to get more info. Perhaps another option for Alcoa's that I (we) weren't aware of? Terry #846 hemi354az Posted 2021-09-30 12:17 PM (#7884 - in reply to #7883) Subject: Re: 10-hole 19.5" Alcoas? Extreme Veteran Location: Scottsdale, Aridzona http://www.fmcowners.com/mbbs22/photos/photo-thumbnails.asp?albumid... LCAC_Man Posted 2021-10-03 3:56 PM (#7885 - in reply to #7884) Subject: Re: 10-hole 19.5" Alcoas? Elite Veteran Location: Oceanside, CA If you can find those 10 on 7.25 wheels for a good price it's definitely and option...or just have these done the way you want to start with: https://alu-wheels.com/A196009-BBM19point5inchx6inch_NO_PCD_BLANK dkarnath Posted 2021-10-04 11:08 AM (#7886 - in reply to #7883) Subject: Re: 10-hole 19.5" Alcoas? Elite Veteran Location: Medford, OR That's my old FMC #850, it's a 1975, get the year right for that money.... dkarnath Posted 2021-10-04 11:14 AM (#7887 - in reply to #7886) Subject: Re: 10-hole 19.5" Alcoas? Elite Veteran Location: Medford, OR http://www.fmcowners.com/mbbs22/photos/photo-thumbnails.asp?albumid... andy1canada Posted 2021-10-05 3:24 PM (#7888 - in reply to #7886) Subject: Re: 10-hole 19.5" Alcoas? Elite Veteran Location: Victoria, BC. Canada Sorry Dan-O! My bad. Should have recognized the old girl right away. Especially with those low seat backs because I distinctly remember our discussion about raising them up some. Terry #846 hal Posted 2021-10-05 8:15 PM (#7889 - in reply to #7885) Subject: Re: 10-hole 19.5" Alcoas? Regular Who and where could you find to machine the wheels Len? Looks a lot better than spending nearly $600 for a well used wheel. I don't have the equiptment or ability to do this myself. Thanks, Hal LCAC_Man Posted 2021-10-06 9:08 AM (#7891 - in reply to #7889) Subject: Re: 10-hole 19.5" Alcoas? Elite Veteran Location: Oceanside, CA Hal, The same company that sells them will put any pattern on them you want. I think when I asked them it was $100 a wheel to custom machine, but, that's been a couple years back when I was looking at 22.5" blanks with the 5 lug pattern..