Getting closer and wondering about a window trim resource... ???

TravalonSF Posted 2021-06-16 3:09 PM (#7761) Subject: Getting closer and wondering about a window trim resource... ??? Location: San Rafael, CA (50.76.41.77) Hi Gang, I have finally completed the painting of 1027 and she is ready for reassembly. I'll have some photos up this weekend... this work thing really keeps getting in the way! Anyone have a resource for the black plastic trim covering the rivets in the window frames? Any idea of what works well for the driver's door and side door rubber seals? Thanks for the help or suggestions, Robert Craig 415-720-1053 stevencouture225@gma Posted 2021-06-21 4:43 PM (#7762 - in reply to #7761) Subject: Re: Getting closer and wondering about a window trim resource... ??? (47.198.89.160) I believe JR products part#11291 will work, that's a 100ft roll. Most RV part stores carry it. andy1canada Posted 2021-06-21 9:27 PM (#7764 - in reply to #7761) Subject: Re: Getting closer and wondering about a window trim resource... ??? Location: Victoria, BC. Canada (172.218.221.116) Robert: I would also suggest you take a gander through Len Barron's D-Max swap album on here as IIRC he also dug up some window gasket stuff. There was not a lot left untouched on his rocket-ship-reno. Extraordinary time, effort and contribution to all of us. Good luck. Terry #846 TravalonSF Posted 2021-06-21 10:44 PM (#7765 - in reply to #7764) Subject: Re: Getting closer and wondering about a window trim resource... ??? Location: San Rafael, CA (24.6.234.156) Hi Terry and Steven, Thank you for your recommendations and I'll order samples from these manufacturers this week. I'll let you know how things work out and put up a few photos of what each looks like installed. https://www.all-rite.com/flexible-insert-1322.html https://www.amazon.com/LPC-White-Camper-Trailer-Flexible/dp/B01N12VN... https://www.amazon.com/JR-Products-11291-Narrow-Insert/dp/B002XLGQRA Len did an amazing job on this coach... all the research, engineering, fabrication and man hours of execution is staggering! BigRabbitMan Posted 2021-06-22 8:40 AM (#7766 - in reply to #7761) Subject: Re: Getting closer and wondering about a window trim resource... ??? Location: Cottage Grove, OR (174.212.228.199) The last time I did mine it was the 5/8 material from All-Rite. dkarnath Posted 2021-06-24 11:54 AM (#7771 - in reply to #7761) Subject: Re: Getting closer and wondering about a window trim resource... ??? Location: Medford, OR (204.10.247.1) Thanks for posting the part number for the cabinet door T moulding in your album Robert. Let us know how the window vinyl moulding goes. The coach is looking good!!