Extreme Veteran
 
Location: Scottsdale, Aridzona | Never liked to TP sticking out.
Some pictures of a "new and improved" item - http://www.fmcowners.com/mbbs22/photos/photo-thumbnails.asp?albumid...
Available at - http://www.downwindmarine.com/SSI-Toilet-Paper-Holder-ABS-Plastic-p... - and other MARINE Supply places.
Have to enlarge the existing hole a little, and figure how YOU want to hold it in there . . . screws, machine screw/nut, glue, strap, other.
Use as is . . . or get spring center "shaft" at hardware store and put hole in each side wall . . . just make sure spring shaft is long enough to stick thru each side wall a little.
Could also put in on the inside sliding panel if you recessed it enough to clear the outside panel slider if you wanted it "closer" . . . but it would hit any "tall stuff" you had under the sink if that panel slid to the left, maybe even the P-pipe. I didn't check that out. Might even fit in the wall of the Shower if that would be easy to reach. Then use existing hole for a drawer . . . or cabinet door. Lots of space behind there. Your choice . . .
Wipe ON ! Lou #120 |
Recessed TP Holder for Bathroom